1 12

Does not apply

Remote Controller with Replaceable Battery, Compatible with Link+ Series Smoke

Remote Controller with Replaceable Battery, Compatible with Link+ Series Smoke

£10.85 GBP
£0.00 GBP £10.85 GBP
Sale Sold out
Taxes included.
  • Easy to Pair: Simply press the test/silence button to pair with your wireless detectors; compatible with X-Sense Link+ Series Alarms: XH02-W, XS01-WR, SD19-W, SD20-W, XC01-WR, CO03D-W, SC06-W, SC07-W
  • Quickly Locate the Source Alarm: Simply press the test/silence button on the remote controller, and all interlinked smoke alarms but the alarm that detected the smoke will be silenced, so you can locate the fire hazard; press it again to silence the source alarm
  • Convenient Remote Control: The X-Sense remote controller allows you to easily test all interconnected smoke alarms and mute any false alarms without the need to climb and reach to press a test button; especially convenient for the elderly
  • Replaceable Battery: The lithium battery can support 1-year continuous use and can be easily replaced by yourself
  • Safety Certification: Comes with a 60-day money-back guarantee, 2-year warranty, and lifetime customer support with a response time of 24 hours

Product Description

Pair the Remote Controller with the X-Sense Alarm

1. Press the test button 4 times to enter pairing mode (The indicator is off during this process). The LED indicator on the remote controller will flash continuously.

2. Once pairing is successful, the LED indicator will light up and then go out in about 3 seconds, indicating that the controller has exited pairing automatically. Alternatively, you can press the test button again to exit pairing.

Test the Wireless Connection Between Alarms

1. Hold the test button while within wireless range. The LED indicator on the remote controller will flash.

2. After the alarms have received a signal (takes about 7 seconds), their LED indicators will flash and the alarms will sound continuously.

3. Release the test button. The LED indicator on the remote controller will stop flashing, indicating that the testing has ended.

Silence the Alarms

Simply press the test button to silence the alarms when non-emergency smoke (e.g. steam) causes nuisance alarms.

During an alarm state, press the test button once and all the interlinked alarms but the initiating alarm will be silenced. Press again to silence the initiating alarm. The LED indicator on the remote controller will blink blue with each press.

Test the Remote Controller's Power Status

In standby mode (non-alarming state), when you press the test button, the LED indicator on the remote controller will blink blue, indicating a normal power supply.

Battery Installation:

1. Pry open the rear cover by inserting the included key into the slot at the bottom of the remote controller's backside.

2. Peel off the insulating film on the button cell. Ensure the correct polarity of the battery and close the cover.

Package Contents:

1 × Remote Controller (Battery Included)

1 × Adhesive Tape

1 × Key

2 × Screws

2 × Anchor Plugs

1 × Manual

Customer Reviews
4.4 out of 5 stars
371
Detection Type Remote Controller
Sensor Type Photoelectric
Battery Life 1 Year
Replaceable Battery ✓
Item Size 72 x 41 x 13 mm
APP Control SBS50 Base Station Required

View full details